帕智电子(上海)有限公司

400 0800 882

产品中心

当前位置:首页 > 产品中心 > 圣邦微 > 锂电池充电管理芯片 > SGM4056

产品中心

SGM4056

High Input Voltage Charger
 
High Input Voltage Charger
GENERAL DESCRIPTION

The SGM4056 is a cost-effective, fully integrated high input voltage single-cell Li-Ion battery charger. The charger uses a CC/CV charge profile required by Li-Ion battery. The charger accepts an input voltage up to 26.5V but is disabled when the input voltage exceeds the OVP threshold, typically 6.8V (SGM4056-6.8) or 10.5V (SGM4056-10.5), to prevent excessive power dissipation. The 26.5V rating eliminates the over-voltage protection circuit required in a low input voltage charger.

The charge current and the end-of-charge (EOC) current are programmable with external resistors. When the battery voltage is lower than typically 2.55V, the charger preconditions the battery with typically 18% of the programmed charge current. When the charge current reduces to the programmable EOC current level during the CV charge phase, an EOC indication is provided by the CHG pin, which is an open-drain output. An internal thermal foldback function protects the charger from any thermal failure.

Two indication pins (PPR and CHG) allow simple interface to a microprocessor or LEDs. When no adapter is attached or when disabled, the charger draws less than 1μA leakage current from the battery.

The SGM4056 is available in Green TDFN-3×3-8L, TDFN-2×3-8L, TDFN-2×2-8L and SOIC-8 (Exposed Pad) packages and is rated over the -40 to +85 temperature range.

PIN CONFIGURATIONS

14162934698325.png14162934776460.png

FEATURES
  • Complete Charger for Single-Cell Li-Ion or Polymer Batteries

  • Integrated Pass Element and Current Sensor

  • No External Blocking Diode Required

  • Low Component Count and Cost

  • Programmable Charge Current

  • Programmable End-of-Charge Current

  • Charge Current Thermal Foldback for Thermal Protection

  • 2.55V Trickle Charge Threshold

  • 6.8V Input Over-Voltage Protection for SGM4056-6.8

  • 10.5V Input Over-Voltage Protection for SGM4056-10.5

  • 26.5V Maximum Voltage for the Power Input

  • Power Presence and Charge Indications

  • Less than 1μA Leakage Current off the Battery When No Input Power Attached or Charger Disabled

  • Available in Green TDFN-3×3-8L, TDFN-2×3-8L, TDFN-2×2-8L and SOIC-8 (Exposed Pad) Packages

APPLICATIONS

Mobile Phones

Blue-Tooth Devices

PDAs

MP3 Players

Stand-Alone Chargers

Other Handheld Devices

ORDERING INFORMATION
Part NumberStatusPackagePinsPb-FreeTemp Range
SGM4056-6.8YTDB8G/TRProductionTDFN-3×3-8L8Y-40℃ to +85℃
SGM4056-6.8YTDC8G/TRProductionTDFN-2×3-8L8Y-40℃ to +85℃
SGM4056-6.8YTDE8G/TRProductionTDFN-2×2-8L8Y-40℃ to +85℃
SGM4056-6.8YPS8G/TRProductionSOIC-8 (Exposed Pad)8Y-40℃ to +85℃
SGM4056-10.5YTDB8G/TRProductionTDFN-3×3-8L8Y-40℃ to +85℃
SGM4056-10.5YTDC8G/TRProductionTDFN-2×3-8L8Y-40℃ to +85℃
SGM4056-10.5YTDE8G/TRProductionTDFN-2×2-8L8Y-40℃ to +85℃
SGM4056-10.5YPS8G/TRProductionSOIC-8 (Exposed Pad)8Y-40℃ to +85℃

电竞大师